LED Strip with double side tape on the back. Easy to stick on anywhere! Cut at any length you need by increment of 5cm.

How to use: Simple cut the LED strip at any length you need (less then 5 meter total length with increment of 5cm each section) solder a pair of wire on copper conductor on the LED Strip to connect your battery source from 7.4-12v DC.

Since the longest working length is 5 meter. If customer ordering 6 meter, you will receive one roll of 5 meter and another roll is 1 meter long.

Specifications:

Certification: CE & Rohs

Ref. Information:

Writer: Diggs
Source : Rcgroups forum
Link: http://www.rcgroups.com/forums/showthread.php?t=922599&highlight=lowpricerc&page=154

“The best setup I have ever had for night flying.

1) the layout looks like a plane so
it is very simple to maintain orientation, even at a long distance.

2) The brushed ESC that allows you to set the brightness level.
This helps prevent glare from the LEDs being too intense and when you get it way up there,

you can give it a little boost, and when it is in close, you can tame it way down.

I wear glasses so glare can be a big issue for me when I am night flying. The brightness control eliminates this problem completely. You also don't blind yourself when you are carrying it out to the field or during the launch. Just keep the lights nice and low and then bump them up to a comfortable level as needed.

If you want to do some night flying, this is a great setup. I recommend it.”

“Done with attaching and wiring the LED strip .Going to install a brushed ESC now so I can control theis brightness.”