LED Strip with double side
tape on the back. Easy to stick on anywhere! Cut at any length you need
by increment of 5cm.
How to use: Simple cut the LED strip at any length you need
(less then 5 meter total length with increment of 5cm each
section) solder a pair of wire on copper conductor on the LED
Strip to connect your battery source from 7.4-12v
DC.
Since the longest working length is 5 meter. If customer ordering 6
meter, you will receive one roll of 5 meter and another roll is 1 meter
long.
Specifications:
Working
voltage: 7.4-12V
DC
Working current(1mtr): 400mA
Standard
length: 1
meter
Each
section: 5cm
Strip width: 8mm
LED
quantity per strip(1 mtr): 60
LEDs
Certification: CE
& Rohs

Ref.
Information:
Writer:
Diggs
Source
: Rcgroups forum
Link: http://www.rcgroups.com/forums/showthread.php?t=922599&highlight=lowpricerc&page=154
“The
best setup I have ever had for night flying.
1)
the layout looks like a plane so
it
is very simple to maintain orientation, even at a long distance.
2)
The brushed ESC that allows you to set the brightness level.
This
helps prevent glare from the LEDs being too intense and when you get
it way up there,
you
can give it a little boost, and when it is in close, you can tame it
way down.
I
wear glasses so glare can be a big issue for me when I am night
flying. The brightness control eliminates this problem completely.
You also don't blind yourself when you are carrying it out to the
field or during the launch. Just keep the lights nice and low and
then bump them up to a comfortable level as needed.
If
you want to do some night flying, this is a great setup. I recommend
it.”



“Done
with attaching and wiring the LED strip .Going to install a brushed
ESC now so I can control theis brightness.”